Why You Should Switch to Self-Priming Pumps and Pointers on Using One

Man operating a water pump machineSelf-priming pumps can reduce your industrial project’s costs, and that is just one benefit of using it. Manufacturers make these pumps with air binding qualities to mix water with air. It helps by getting rid of the extra air, but self-priming pumps do not work without water.

You can choose to make the switch today to bring benefits to your industrial projects.


There are a couple of advantages to using a self-priming pump for your industrial project. First, it is notably inexpensive compared with other types of centrifugal pumps. This is especially true if you buy it in wholesale and ask for a good deal from your supplier.

Another benefit is that self-priming pumps can manage solids of up to three inches. This would be very beneficial for projects that handle tons of solids.

Last but definitely not the least, self-priming pumps can keep on pumping fluid even when the device is far from the pit. Self-priming pumps take the point with this one when compared with the submersible pump.

Tips for Using Self-Priming Pumps

1. Fill the self-priming pump with water before using it. It needs some liquid to recirculate.

2. Make sure you have an air release valve. Place it in your discharge line, which is located between the check valve and the pump. This helps release the air, which prevents excessive back pressure on the pump’s discharge.

3. When getting a self-priming pump, ask your supplier for a double-type, grease-lubricated mechanical shaft seal. This is specially made for contractor use and should be included in the package. This will help prevent the air from leaking through, which makes priming much easier.

To get the best out of your self-priming pump, make sure to have a professional install it. Ask your supplier if they can do the job for you and if they will require an extra fee for it.